CENTRAL SUBSIDIES REGISTRATIONS NCSS/ MSME

CENTRAL SUBSIDIES REGISTRATIONS NCSS/ MSME



MINISTRY OF COMMERCE AND INDUSTRY
(Department for Promotion of Industry and Internal Trade)
NOTIFICATION New Delhi, the 19th February, 2021

F. No. 1(1)/2020-SSS.—The Government of India is pleased to announce New Central Sector Scheme for Industrial Development of Union Territory of Jammu & Kashmir. 1. Scheme Title: This Scheme will be called New Central Sector Scheme for Industrial Development of Jammu & Kashmir.

2. Coverage: The Scheme will cover the Union Territory of Jammu & Kashmir.

3. Commencement and Duration of the Scheme: It will be effective from 01.04.2021 and will remain in force up to and inclusive of 31.03.2037.

4. Application period for registration: Registration shall commence from 01.04.2021 and will continue till 30.09.2024, subject to the guidelines issued in this regard. Notwithstanding the aforementioned time period, if based upon the registrations already granted, the projected financial liability reaches 115 percent of the Approved Funds, registration process may be paused, either temporarily or permanently. However, registration process may be resumed depending on availability of Approved Funds.

4.1. Merely submitting application for registration will not entitle any applicant for registration under this scheme. Further details shall be provided in the guidelines of this scheme.

4.2. No unit will have the right to register under this scheme or claim the benefits unless it is specifically approved by the registering authority as laid out in the guidelines.

4.3. The registration will be granted by the registering authority as laid out in the guidelines, which will, inter-alia, consider the prima-facie eligibility of the unit, availability of Approved funds.

4.4. All units willing to avail incentive(s) under this scheme have to apply for registration through the online portal.

5. Grant of registration: All applications for registration shall be disposed of by 31.03.2025 unless otherwise extended.

6. Definitions:

6.1. „Approved Funds‟ mean financial outlay allocated under each component of this scheme.

6.2. „Arm‟s length price‟ as defined under the provisions of Income Tax Act, 1961.

6.3. „Commencement of Commercial Production: means starting of manufacturing of finished goods on commercial basis which is preceded by trial production and installation of complete plant and machinery for manufacturing of finished products in commercial quantity and all raw materials, consumables, etc. required for manufacture are available.

6.4. „Commencement of Commercial Operation: means starting of operation/delivering of services on commercial basis.

6.5. „Existing Unit‟ means a unit which has commenced commercial production/operation prior to1.4.2021 and is registered under GST in the UT of Jammu & Kashmir. 6.6. „Finished Goods‟ means the goods actually produced and supplied by an industrial unit and for which it is registered under the Scheme.

6.7. „Manufacturing unit‟ means a unit which carries out processing of raw material or inputs in any manner that results in emergence of a new product having a distinct name, character and use and the term ―manufacturing unit‖ shall be construed accordingly.‖

6.8. „New Unit‟ (a) For manufacturing sector means a unit registered under this scheme on or after 1.4.2021 but not later than 31.03.2025. Such unit has to commence commercial production within 3 years from the date of grant of registration. (b) For Service sector means a unit registered under this scheme on or after 1.4.2021 but not later than 31.03.2025. Such unit has to commence commercial operation within 3 years from the date of grant of registration. (c) A new unit will be required to fulfill the following conditions: (i) It is not formed by splitting up, or reconstruction of a business already in existence. (ii) It is not formed by transfer to the new unit of plant or machinery previously used for any other purpose. (iii) It has not relocated from elsewhere and/or is not an existing unit reopened under a new name and style. Provided that heritage property not in use before 1.4.2021 is restored thereafter for commercial or hospitality or tourism services on commercial basis will also be considered as new unit as per eligibility conditions to be further elaborated in detailed guidelines.

6.9. „Plant and Machinery‟ in case of Manufacturing units shall cover industrial plant and machinery as erected at site which are newly purchased from open market at an arm‘s length price. It excludes relocated/recycled/refurbished plant and machinery.

6.10. „Building and other durable physical assets‟ in case of Service sector units shall cover new building and other durable physical assets for a service sector unit where purchases have been made following an Arm‘s length pricing

6.13. „Service unit‟ means a unit providing “services”.

6.14. „Substantial expansion‟ means an additional investment of minimum twenty-five percent of the total amount of investment already made in an existing unit in plant and machinery (for manufacturing sector), or construction of building and other durable physical assets (for service sector). The additional investment should result in increase of production capacity/enhancement of Services or diversification and should not be a mere replacement of existing plant and machinery.

7. Eligibility for availing incentives:

7.1. All units eligible under Manufacturing and eligible Service sector will be granted incentive(s) under this scheme as defined under respective incentives.

7.2. The scheme shall not be applicable to the units which manufacture the products listed in the negative list at Annexure –I.

7.3. Service sector units with a minimum investment of Rs.1 crore in building and other durable physical assets will be eligible for incentives under this scheme. The scheme shall be applicable only for services listed in positive list in Annexure-II which may be modified further by the Steering Committee.

7.4. All eligible units have to commence commercial production/operation within 3 years from the date of grant of registration.

7.5. Any investment made on or after 1.4.2019 by a unit in plant and machinery (for manufacturing sector) or construction of building and other durable physical assets (for service sector) will be taken into consideration to decide the eligible value of investment as per the entitlement under Capital Investment Incentive, Capital Interest subvention and GST Linked Incentive of this scheme. However, the date of commencement of commercial production/ operation has to be on or after 1.4.2021. The eligibility for availing any incentive is subject to grant of registration under the scheme.

7.6. (a) Cost of Plant and Machinery (in manufacturing sector) that is essential for manufacturing of finished goods but excludes cost of land, consumables, disposables or any other item charged to revenue.

(b) Cost of construction of Building and procurement of other durable physical assets for the service sector unit that are basic to the running of that particular unit in service sector but excludes cost of land, consumables, disposables or any other item charged to revenue.

7.7. Units availing benefits under other schemes of the Government of India will not be eligible for similar incentives under this Scheme.

7.8. Subject to provisions of Clause 7.7, such units can avail other incentive(s) under the Scheme as per eligibility. Details regarding this shall be specified in the guidelines.

7.9. The beneficiary of this scheme has to furnish an undertaking to abide by the terms and conditions of the scheme.

7.10. Eligibility under this scheme will be subject to verification on investment (Core and Non-Core) in Plant and Machinery (in manufacturing sector)and cost of construction of building and other durable physical assets (in service sector). However, the incentive will be eligible only for core segment in both manufacturing and service sector. Details will be laid down in the guidelines.

7.11. Period for availing incentive(s): All eligible units can avail specified incentive under this scheme up to a period as specified in the respective incentives.

10. Incentives under the Scheme Subject to eligibility, the following incentives are provided under this scheme.

View Detail Book Now

Documents Required

Details

CII : Capital Investment Incentive*

CII : Capital Investment Incentive*

CENTRAL SUBSIDIES REGISTRATIONS NCSS/ MSME

Eligible Units:
- New Units
- Existing Units with Substantial Expansion

The Capital Investment Incentive is a unique opportunity offered under the NCSS scheme, providing financial incentive to eligible businesses for their investments. To qualify, businesses must meet specified criteria, such as maintaining a minimum level of investment and production or adhering to defined operational guidelines. This incentive aims to bolster economic growth and development. Please refer to the scheme document to check eligibility.

For units established on or after April 1, 2021, in Zone A, they qualify for a 30% incentive of their total capital investment in eligible Plant & Machinery. Alternatively, for units in Zone B, they are eligible for a 50% incentive of their total capital investment in eligible Plant & Machinery, with a maximum incentive cap of Rs. 5 Crore in Zone A and Rs. 7.5 Crore in Zone B.

The following units will be eligible to avail of this incentive

a. New units with an investment of not more than Rs.50.00 (Fifty) crore in Plant & Machinery (for the manufacturing sector) or Building and all other durable physical assets (for the service sector) will be eligible to avail of this incentive in both Zone A and Zone B.


b. (i) Existing units undertaking substantial expansion with an investment of not more than Rs.50.00 (Fifty) crore in Plant & Machinery (for the manufacturing sector) or Building and all other durable physical assets (for the service sector) will be eligible to avail benefit under this incentive in both Zone A and Zone B. c. The health care sector unit will be eligible to avail this incentive-. New unit and Existing units-undertaking substantial expansion of healthcare sector will be eligible to avail benefit under this incentive in both Zone A and Zone B, irrespective to their actual investment (no upper cap of investment)


(ii) Subject to provision in Clause 6.8(c), a unit will be eligible for this incentive only if it installs a new plant and machinery (for the manufacturing sector) or constructs new building and other durable physical assets (for the service sector), where purchases have been made based on Arm’s Length Pricing,.

(iii) A service sector unit will be eligible for this incentive only if it makes an investment of not less than Rs. 1.00 crore in the new building and other durable physical assets (b) (i) All eligible units located in Zone A category blocks in the UT of Jammu & Kashmir will be provided Capital Investment Incentive @30% of the investment made in plant and machinery (for manufacturing sector), or for construction of building and installation of other durable physical assets (for services sector) with maximum limit of Rs. 5.00 crore.

(ii) All eligible units of healthcare sector located in Zone A category blocks in the UT of Jammu & Kashmir will be provided Capital Investment Incentive @30% of the investment made in construction of building and installation of other durable physical assets with maximum limit of Rs. 15.00 crore.


(c) (i) All eligible units located in Zone B category blocks in the UT of Jammu & Kashmir will be provided Capital Investment Incentive @50% of the investment made in plant and machinery (for manufacturing), or for construction of building and installation of other durable physical assets (for services sector) with maximum limit of Rs.7.50 crore.

(ii) All eligible units of healthcare sector located in Zone B category blocks in the UT of Jammu & Kashmir will be provided Capital Investment Incentive @50% of the investment made in construction of building and installation of other durable physical assets with maximum limit of Rs. 15.00 crore.


(d) An existing unit can avail this benefit for substantial expansion only once during the validity period of the scheme.


(e) A new unit registered under the scheme will not be eligible to avail the benefit under substantial expansion.


(f) Physical verification of the units is mandatory before availing this incentive. However, under special circumstances, on recommendations by UT, with due justification, Steering Committee may consider electronic modes, or any other method as deemed appropriate in lieu of physical verification


MINISTRY OF COMMERCE AND INDUSTRY
(Department for Promotion of Industry and Internal Trade)
NOTIFICATION New Delhi, the 19th February, 2021


RELEVANT EXTRACTS OF NOTIFICATION


10.1. Capital Investment Incentive(CII):

(a) Eligibility:

(i) The following units will be eligible to avail this incentive

a. New units with investment of not more than Rs.50.00 (Fifty) crore in Plant & Machinery (for manufacturing sector) or Building and all other durable physical assets (for service sector) will be eligible to avail this incentive in both Zone A and Zone B.

b. Existing units undertaking substantial expansion with investment of not more than Rs.50.00 (Fifty) crore in Plant & Machinery (for manufacturing sector) or Building and all other durable physical assets (for service sector) will be eligible to avail benefit under this incentive in both Zone A and Zone B.

(ii) Subject to proviso in Clause 6.8(c), a unit will be eligible for this incentive only if it installs new plant and machinery (for manufacturing sector) or constructs new building and other durable physical assets (for service sector), where purchases have been made based on Arm‘s Length Pricing,.

(iii) A service sector unit will be eligible for this incentive only if it makes investment of not less than Rs. 1.00 crore in new building and other durable physical assets

(b) All eligible units located in Zone A category blocks in the UT of Jammu & Kashmir will be provided Capital Investment Incentive @30% of the investment made in plant and machinery (for manufacturing sector), or for construction of building and installation of other durable physical assets (for services sector) with maximum limit of Rs. 5.00 crore.

(c) All eligible units located in Zone B category blocks in the UT of Jammu & Kashmir will be provided Capital Investment Incentive @50% of the investment made in plant and machinery(for manufacturing), or for construction of building and installation of other durable physical assets (for services sector) with maximum limit of Rs.7.50 crore.

(d) An existing unit can avail this benefit for substantial expansion only once during the validity period of the scheme.

(e) A new unit registered under the scheme will not be eligible to avail the benefit under substantial expansion.

(f) Physical verification of the units is mandatory before availing this incentive. However under special circumstances, on recommendations by UT, with due justification, Steering Committee may consider electronic modes, or any other method as deemed appropriate in lieu of physical verification.

(g) Detailed procedure for registration and availing this incentive shall be laid down in the guidelines



CIS : Capital Interest Subvention*

CIS : Capital Interest Subvention*

CENTRAL SUBSIDIES REGISTRATIONS NCSS/ MSME

Eligible Units:
- New Units
- Existing Units with Substantial Expansion

Capital Interest Subvention, a key component of the NCSS scheme, offers financial relief to eligible businesses. To qualify, enterprises must pay timely installments of the term loan, including compliance with term loan repayment schedule and adherence to operational guidelines. This subvention promotes economic growth and sustains businesses through interest rate support. Please refer to the scheme document to check eligibility.

Interest on loan up to the principal amount of Rs. 500 crore for investment in eligible plant and machinery shall be eligible for Capital Interest subvention. New units will be eligible for this incentive on the loan availed on investment made in eligible plant and machinery (for manufacturing sector), or construction of building and other durable physical assets (for service sector).

All eligible units can avail of Capital Interest Subvention at the annual rate of interest of 6%
for a maximum of 7 consecutive years
from any date after the date of disbursement of sanctioned loan amount availed for procurement of ‘P&M in case of Manufacturing units’ and ‘building and other durable physical assets’ in case of Service units.
The incentive shall be provided on a term loan disbursed on or after 01-04-2019 against the eligible investment.
However, disbursement of eligible amounts under this incentive shall begin only after the commencement of commercial production.

MINISTRY OF COMMERCE AND INDUSTRY
(Department for Promotion of Industry and Internal Trade)
NOTIFICATION New Delhi, the 19th February, 2021


RELEVANT EXTRACTS OF NOTIFICATION


10.2. Capital Interest Subvention (CIS)
(a) Eligibility:
(i) New units will be eligible for this incentive on the loan availed on investment made in eligible plant and machinery (for manufacturing sector), or construction of building and other durable physical assets (for service sector).
(ii) Existing units undertaking substantial expansion will also be eligible for the incentive as per clause 10.2(a)(i).
(iii) Interest on loan up to the principal amount of Rs. 500 crore for investment in eligible plant and machinery shall be eligible for Capital Interest subvention. If the total principal amount of loan (loan being defined as a whole and not as per draw-down amount in each tranche) is more than Rupees 500 crore, then interest on the loan amount exceeding Rs. 500 crore would not be eligible for Capital Interest Subvention.
(iv) The Capital Interest Subvention would be eligible on amount disbursed and not on the principal amount sanctioned for the term loan.
(v) A unit will be eligible for this incentive only if it installs new plant and machinery (for manufacturing sector) or constructs new building and installs other new durable physical assets (for service sector) where purchases have been made based on Arm‘s Length Pricing.
(vi) A service sector unit with an investment of not less than Rs. 1 crore in new building and other new durable physical assets will be eligible for this incentive.
(b) All eligible units can avail Capital Interest Subvention at the annual rate of interest of 6% for a maximum of 7 consecutive years from any date after the date of application for registration under this scheme. However, disbursement of eligible amount under this incentive shall begin only after commencement of commercial production.
(c) In future, if the annual rate of interest falls below 8%, an eligible unit will still be liable to pay a minimum amount of interest at the annual rate of interest of 2%. (Illustration: In future, in case the annual lending rate by a bank for an eligible unit falls to 7%, the amount of interest subvention will be limited to 5%, and the unit will bear 2% interest burden).
(d) This incentive is applicable on the loans availed from a Scheduled Commercial Banks or Financial Institutions registered by Reserve Bank of India.
(e) Detailed procedure for availing this incentive shall be laid down in the guidelines.




GSTLI : GST Linked Incentive*

GSTLI : GST Linked Incentive*

Eligible Units:
- New Units

The Goods and Services Tax Linked Incentive (GSTLI) is a vital element of the NCSS initiative, offering substantial financial benefits to eligible businesses. To avail the GSTLI, enterprises must fulfill eligible conditions and adhere to specified guidelines as mentioned in the scheme document.

All eligible units will be granted Goods & Services Tax Linked Incentive (GSTLI) equal to 100% of Gross payment of GST, i.e. GST paid through cash and input tax credit for a maximum period of 10 years from the date of commencement of commercial production/operation or till the validity of the scheme whichever is earlier. However GST paid on exported goods or services will not be counted towards eligible incentive amount under this component.

The amount of incentive paid in a financial year will not exceed one-tenth of the total amount of eligible incentive under this component subject to full payment of GST as per GST return filed for the claim period.

The quantum of incentive will be the same irrespective of the fact whether the unit is located in Zone A or Zone B in the UT of Jammu & Kashmir.

Discover the potential of GSTLI as a catalyst for your business's success, ensuring compliance, transparency, and financial stability in your journey toward economic prosperity.



WCIS : Working Capital Interest Subvention*

WCIS : Working Capital Interest Subvention*

Eligible Units:
- Existing Units

The Working Capital Interest Subvention (WCIS) is a pivotal component of the NCSS scheme, offering substantial financial benefits to eligible businesses to grow their business potential. To avail the WCIS, enterprises must fulfill eligible conditions and adhere to specified guidelines as mentioned in the scheme document.

All existing units in the UT of Jammu & Kashmir registered under GST prior to the date of notification of this scheme will be eligible for this incentive, subject to the registration and other conditions as detailed in the guidelines.

All existing eligible units can avail interest subvention @ 5% on working capital loan for a maximum of 5 consecutive years from the date of grant of registration under this scheme. Existing eligible units availing benefits under this component will be eligible for five years period, even when they are undertaking substantial expansion.

The maximum benefit under this component for manufacturing as well as service sector units is Rs. 1 crore in 5 years. The methodology for calculation of the eligible amount of working capital interest subvention will be prescribed in the detailed guidelines issued there under.

Units located both in Zone A and Zone B in the UT of Jammu & Kashmir are eligible for this incentive.



GOVT. PORTAL FOR REGISTRATION

NCSS PORTAL GOVT. OF INDIA

CENTRAL SUBSIDIES REGISTRATIONS NCSS/ MSME


REGISTER FOR SUBSIDIES AND CLAIMS ON THIS GOVT. OF INDIA PORTAL
TAKE A HELP OF PROFESSIONALS (GO LEGAL FILING/ JKITR) TO REGISTER AND FOR MAKING CLAIMS

(i) Capital Investment Incentive (CII).

(ii) Capital Interest Subvention (CIS).

(iii) Goods & Services Tax Linked Incentive (GSTLI).

(iv) Working Capital Interest Subvention (WCIS).

CELL NO: 6006751817/ 6006751812


[CLICK HERE TO VISIT THE CENTRAL GOVT PORTAL]





DPR FOR REGISTRATION UNDER NCSS

DETAILED PROJECT REPORT FOR REGISTRATION UNDER NCSS GOVT. OF INDIA

CENTRAL SUBSIDIES REGISTRATIONS NCSS/ MSME



LIST OF DOCUMENTS REQUIRED FOR REGISTRATION

LIST OF DOCUMENTS REQUIRED FOR REGISTRATION

CENTRAL SUBSIDIES REGISTRATIONS NCSS/ MSME

GET A PROFESSIONAL HELP OF CONSULTANTS FOR FILING APPLICATION FOR SUBSIDY REGISTRATION IN JK

CONTACT: 6006751817/ 6006751812/ 9596194306



SERVICE SECTOR ELIGIBLE FOR SUBSIDY

SERVICE SECTOR ELIGIBLE FOR SUBSIDY UNDER NEW CENTRAL SECTORAL SCHEME

CENTRAL SUBSIDIES REGISTRATIONS NCSS/ MSME

THE FOLLOWING SERVICES ARE ELIGIBLE FOR SUBSIDY UNDER NEW CENTRAL SECTORAL SCHEME

MINIMUM CAPITAL  INVESTMENT IN SERVICE SECTOR PROJECTS FOR THE SAKE OF SUBSIDY SHOULD BE MORE THAN ONE CRORE


1TOURISM AND HOSPITALITY SERVICES INCLUDING HEALTH AND WELNESS TOURISM
2SERVICES PROMOTING FILM TOURISM INCLUDING FILM CITIES AND STUDIOS
3ROPEWAY, ENTERTAINMENT PARKS AND RIDES
4HERITAGE PROPERTY RESTORATION SERVICES
5HEALTH CARE SERVICES (HOSPITAL MORE THAN 25 BEDS)
6IT AND ITES SERVICES
7MAINTENANCE AND REPAIR SERVICES
8FREIGHT TERMINALS, LOGISTICS PARKS AND WARE HOUSING (INCLUDING COLD STORAGE SERVICES)
9TESTING, R&D, ANALYSIS AND CERTIFICATION SERVICES
10EDUCATION AND SKILL DEVELOPMENT SERVICES